+- Fearless Forums (https://fearlessrp.net)
+-- Forum: Community & Server Information (https://fearlessrp.net/forumdisplay.php?fid=1)
+--- Forum: Help & Support (https://fearlessrp.net/forumdisplay.php?fid=3)
+---- Forum: Support Archive (https://fearlessrp.net/forumdisplay.php?fid=158)
+---- Thread: Adv Dupe stuck at 10% (/showthread.php?tid=58410)
Adv Dupe stuck at 10% - Sgtbender2000 - 03-05-2015
So I've recently transferred a dupe from the build server to V2D, but when I load it the dupe freezes at 10% and won't show any ghosted props. I transferred from the character page, but it still freezes.
RE: Adv Dupe stuck at 10% - Rain - 03-05-2015
Mine did this when I was spawning my casino a few days ago, I waited around 30 seconds and it eventually spawned. If that doesn't work you could try reloading/reopening the dupe through the menu a few times.
RE: Adv Dupe stuck at 10% - Smex - 03-05-2015
This may be that you have too many constraints on the actual dupe itself or something went wrong during transfer, if it's the first you will have to rebuild it, try pasting it on build and see if the actual dupe is the problem.
RE: Adv Dupe stuck at 10% - Sgtbender2000 - 03-06-2015
(03-05-2015, 11:41 PM)Smex Wrote: This may be that you have too many constraints on the actual dupe itself or something went wrong during transfer, if it's the first you will have to rebuild it, try pasting it on build and see if the actual dupe is the problem.
It has no constraints and it's not the first time it has happened.
RE: Adv Dupe stuck at 10% - DVN - 03-06-2015
Have you tried simply re-starting Gmod or re-connecting to the server? Mine bugged out yesterday but sorted itself out.
RE: Adv Dupe stuck at 10% - Sgtbender2000 - 03-18-2015
(03-06-2015, 01:09 AM)DVN Wrote: Have you tried simply re-starting Gmod or re-connecting to the server? Mine bugged out yesterday but sorted itself out.I rejoined twice, crashed three times, and still have the problem. I've tried transferring it over with a new name, still nothing. I've also encountered yet another bug that swaps my Adv Dupe with Keypad tool really fast preventing me from using either tools or any for that matter.
Any more suggestions?
RE: Adv Dupe stuck at 10% - James_Gaff - 03-18-2015
Is this all dupes or just a singular?
If it's a singular dupe, then the file has corrupted (most likely)
RE: Adv Dupe stuck at 10% - Suarez - 03-18-2015
As stated the file could be corrupted. I had the problem with one of my dupes and after about a minute of waiting it somehow started to ghost in.
RE: Adv Dupe stuck at 10% - Rylund - 03-21-2015
Remember to not have any dots, commas, _, :, ; etc in the name of the dupe - This will break the dupe when transferring (personal experience) just rename it and then transfer it.
In case that's not the error, try to paste it on the original server and then save it on new.